 |
|
|||||||
| DBM Cycles - Dave Burk Motorsports 3444 N. Ten Mile Dr, Jefferson City, MO 65109 |
DBM Cycles - Dave Burk Motorsports Thread, Contact and Sponsor info - DBM - Dave Burke Motorsports in Sponsor Forums; DBM Motorsports 3444 N. Ten Mile dr. Jefferson City, Mo 65109 Shop: 573-635-8285 Cell: 573-644-3268 Email: travishwt@yahoo.com DBM specializes in ...
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
07-24-2009, 12:46 PM
|
||||
|
||||
Contact and Sponsor info - DBM - Dave Burke Motorsports
DBM Motorsports
3444 N. Ten Mile dr. Jefferson City, Mo 65109 Shop: 573-635-8285 Cell: 573-644-3268 Email: travishwt@yahoo.com DBM specializes in high performance engine and suspension modifications, and other cool shit for street and dirtbikes, atvs, and micro cars. DBM also has the only dyno-tuning service for motorcycles in the Jefferson City area! Please let Travis and the other folks at DBM know that you saw them on MMR!
__________________
''The man hunched over his motorcycle can focus only on the present instant of his flight; he is caught in a fragment of time cut off from both the past and the future; he is wrenched from the continuity of time ... in other words, he is in a state of ecstasy; in that state he is unaware of his age, his wife, his children, his worries, and so he has no fear, because the source of fear is in the future, and a person freed of the future has nothing to fear.'' www.myspace.com/midmoriders Last edited by FalxZZR; 07-31-2009 at 03:36 PM. 
|
|
#2
07-24-2009, 09:33 PM
|
||||
|
||||
|
What are their hours?
__________________
1979 Yamaha XS650 - new project 1985 Yamaha XJ700 1982 Yamaha XJ650 - SOLD!! 2003 Kawasaki ZX6- R - SOLD!!  1989 Yamaha TW200 (SOLD)
|
|
#3
07-28-2009, 02:33 PM
|
||||
|
||||
|
Quote:
Anytime during the day, up until about midnight on some nights  Actually I will let Travis post up his own hours, but if you drive by and the door is open they are there, i have been there dynoing my bike at 11pm so they are definately open late~
__________________
''The man hunched over his motorcycle can focus only on the present instant of his flight; he is caught in a fragment of time cut off from both the past and the future; he is wrenched from the continuity of time ... in other words, he is in a state of ecstasy; in that state he is unaware of his age, his wife, his children, his worries, and so he has no fear, because the source of fear is in the future, and a person freed of the future has nothing to fear.'' www.myspace.com/midmoriders
|
|
#4
07-31-2009, 03:44 PM
|
||||
|
||||
|
So the actual hours are noon-8pm mon-fri :P
__________________
''The man hunched over his motorcycle can focus only on the present instant of his flight; he is caught in a fragment of time cut off from both the past and the future; he is wrenched from the continuity of time ... in other words, he is in a state of ecstasy; in that state he is unaware of his age, his wife, his children, his worries, and so he has no fear, because the source of fear is in the future, and a person freed of the future has nothing to fear.'' www.myspace.com/midmoriders
|
|
#5
09-24-2009, 09:34 PM
|
||||
|
||||
|
I have had work done by them and was very impressed by the quality.If you need parts cleaned they do a great job at that also.Travis is a pro.You can see right away that he has been doing this for a long time.They also seem to get to your job right away.
Cleaning carbs  Shop  They work on all types of motors  Dyno  They machined a piece so i could hook up a left side speedo 
|
|
#6
09-24-2009, 11:15 PM
|
||||
|
||||
|
Travis is the man. He would occasionally come into the shop to get a gasket or something and be talking about different things. I remember one time he was talking about a tech inspection at the races that he was overlooking. While the inspectors were tearing down a winning engine to verify that it met the sanctioned guidelines, he was making mental notes and asking questions to see exactly what they were checking. He then started rattling off all this stuff that he was going to do to squeeze out some extra ponies and still be "legal". Shaving valve stems, regrinding valve heads, chamfering this or that - hell, I don't know. It was all pretty well over my head. He knows his shit. I wouldn't hesitate an instant to take any performance questions or needs to him. All my stuff is slow, but I kinda like it that way. Once my new project is underway - I'll be picking his brain and utilizing his talents for sure.
__________________
1979 Yamaha XS650 - new project 1985 Yamaha XJ700 1982 Yamaha XJ650 - SOLD!! 2003 Kawasaki ZX6- R - SOLD!! 1989 Yamaha TW200 (SOLD)
|
|
| Tags |
| dave burke motorsports, dbm, dyno, dyno tune, high performance, jefferson city |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -6. The time now is 11:09 AM.
